We import all kinds of electronic industrial equipment

4' LED Vapor Tight Fixture, 40W, 120-277V, 4000K, 4400 Lumens, 0-10V Dim, DLC 4.0, IP65 Intended Use: Ideal for dusty/wet environments, farmyards, parking garages, canopies, locker rooms and manufacturing facilities. Features: Light gray, fully gasketed polycarbonate housing with stainless steel captive latches to provide a waterproof seal. IP65 Rated AVG. LIFE HOURS50000 CRI80 LUMENS 4400 PACKAGE QUANTITY 1 TYPELED Vaportight LENS MATERIAL Polycarbonate HEIGHT INCHES 3.46 WIDTH INCHES 4.72 HOUSING TYPE Polycarbonate LENGTH INCHES 47.24 WARRANTY 5 Years DIMMABLE Yes VOLTAGE 120-277 COLOR TEMPERATURE 4000 WATTAGE 40

Dimensions: 12-1/4" x 8.13" x 16-1/4" Weight: 27.70 lbs. Stick welder / Lift arc TIG capable (TIG torch not included) Welds 16 gauge up to 5/16" Portable Handles up to 1/8" electrode 120-volt input, 90 Amp output Duty cycle: 30% @ 80A VOLTAGE 120V PROCESS Stick or TIG DESCRIPTION Stick/TIG Welder DUTY CYCLE80A @ 30% OUTPUT 90A AMPS 90 CUTTING CAPACITY 32 SINGLE PASS CAPACITY 5/16"

ACCESSORY WIDTH INCHES 1-7/8 COLOR FINISH Black Dial CONSTRUCTION Steel DESCRIPTION Combo Padlock-Front Faced LOCK TYPE Combination Different SHACKLE DIAMETER INCHES 9/32 SHACKLE INSIDE WIDTH INCHES 13/16 SHACKLE INSIDE HEIGHT INCHES 3/4 SHACKLE MATERIAL Hardened Steel accessory_type Lock

WIDTH INCHES 1-1/4 HEIGHT INCHES 3-7/8 CAPACITY LBS 1000 BOLT SPACING INCHES2-1/4" x 3-1/4" CASTER TYPE Swivel Plate PACKAGE QUANTITY Set of 4 Casters PLATE SIZE 4" x 2-15/16" WHEEL DIAMETER INCHES 3 WHEEL TYPE Hard Rubber

WIDTH INCHES 22 HEIGHT INCHES 52 CAPACITY LBS 600 COLOR FINISH Blue CONSTRUCTION Steel TYPE Curved Handle WEIGHT LBS 30 WHEEL DIAMETER INCHES 10 WHEEL TYPE Pneumatic

HEIGHT TO TOP STEP 1'5" CAPACITY LBS 300 COLOR FINISH Black/Gray CONSTRUCTION Aluminum QUANTITY STEPS 2 WEIGHT LBS 15.4 STYLE Safety Step LADDER TYPE Step Ladder STORAGE HEIGHT 2'9" STORAGE DEPTH 5" RUNG SIZE 9" HEIGHT TO TOP STEP/PLATFORM 17"

Material : Cast Iron gripbell

Needle Roller Bearing METRIC RNA49/28UU, Double Sealed, 32mm Bore, 45mm OD IKO Machined Type Needle Roller Bearing consists of solid outer ring, rollers and retainer, without inner ring. They are with low sectional height, large load ratings and rigidity, and most of them come with seals. Prepacked lubricant is not provided except double sealed bearings (suffix UU). Proper lubricant must be applied when they are used. Machined Type needle roller bearings are generally used with shafts without inner rings. 0.2μmRa or less shaft surface finish and HRC 58 to 64 shaft hardness are recommended. When these requirements are not possible, use of IKO Inner Rings are recommended. DYNAMIC LOAD RATING (N)21000 OUTER RING CORNER RADIUS MIN. (mm)0.3 BORE TOLERANCE (mm)+0.041 / +0.025 MAX SPEED / GREASE (RPM)6000 O.D. TOLERANCE (mm)+0 / -0.011 TOLERANCE ISO Class 0 SERIES RNA49 OIL HOLE & GROOVE Yes BORE (Fw) mm/inch 32 WIDTH (C) TOLERANCE (mm)+0 / -0.120 HOUSING SHOULDER DIA MAX (mm)43 OD MM (INCH)45 APPROPRIATE INNER RING LRTZ283218 WIDTH (mm)17 STATIC LOAD (N)26800